KitchenAid KHDF 1160/I/01 Návod k použití

Procházejte online nebo si stáhněte Návod k použití pro Sporáky KitchenAid KHDF 1160/I/01. KitchenAid KHDS 1160/I/01 Instruction for Use Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 16
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
KHDF 1160
KHDS 1160
Instructions for use
GB
Zobrazit stránku 0
1 2 3 4 5 6 ... 15 16

Shrnutí obsahu

Strany 1 - KHDS 1160

KHDF 1160KHDS 1160Instructions for useGB

Strany 2

The electrical connections must comply with currentlegislation and be carried out by a qualified, competentperson.• Information on the voltage and pow

Strany 3

Important: The following procedure shall be carried out bycompetent technical personnel only. The hob can beinstalled on different types of materials,

Strany 4 - Using the burners

Note: Refer to the injector table to ensure the correct type ofinjector is to be fitted.Traditional burners (T)1. Remove the pan supports (A).2. Remov

Strany 5

To fit the double crown wok burner:Insert in the following order:1. burner ring (A);2. decorative covering ring (B);3. external burner cap (C);4. inte

Strany 6 - Injector table

Always disconnect the hob from the electricalpower supply and wait until it cools before cleaningand/or doing maintenance work. in order to keepyour h

Strany 7 - Warnings and suggestions

If the hob is not working properly, work throughthis guide before contacting our Customer CareCentre.The burner does not ignite, or the flame isunstea

Strany 8 - Safeguarding the environment

5019 719 01164Printed in Italyn04/08NLWhirlpool Europe S.r.l.Viale G. Borghi, 27 - 21025 Comerio (VA)Phone 0332.759111 - Fax 0332.759268www.whirlpool.

Strany 10 - Electrical connection

Product description and symbols 4Using the burners 4Practical advice on using the hob 5Positioning the pan supports and wok support 5Hood and cabinetr

Strany 11

1. Removable pan supports2. Auxiliary burner3. Semi-fast burner4. Semi-fast burner5. Professional wok burner6. Auxiliary burner control knob7. Semi-fa

Strany 12 - Replacing the injectors

Please read all these instructions to get the bestout of your hob.• Use pans with a similar diameter to theburner(see the table).• Use flat bottomed p

Strany 13 - Fitting the wok burner

If a hood is to be installed above the hob, refer to the hoodinstallation instructions to ensure the hood is installed at thecorrect minimum height ab

Strany 14

To get the most out of your hob, please readthe instructions carefully and keep them forfuture consultation.• These instructions are only valid in the

Strany 15 - After Sales Service

PackingThe packing material is 100% recyclable and islabelled with the recycling symbol . Pleasedispose of all packing responsibly and carefully.Prod

Strany 16 - 5019 719 01164

Technical information for the installer• Warning: this is a heavy products whichrequires the installation to be carried outby two people.• When instal

Komentáře k této Příručce

Žádné komentáře